45,600 Sq Ft Self-Leveling Concrete Pour — Linden Housing Authority, 12 Stories in Record Time
By Alessio Trabelsi, owner of The Concrete Makeover ·
When the Linden Housing Authority in Linden, New Jersey needed a complete floor renovation across an entire 12-story residential building, they turned to The Concrete Makeover LLC — one of the most experienced self-leveling concrete contractors in the tri-state area. The scope of this commercial self-leveling project was massive: 45,600 square feet of self-leveling cement flooring spread across all 12 floors of the building, requiring expert coordination, industrial-grade pumping equipment, and a highly skilled crew working at peak efficiency.
Project Overview: 45,600 Square Feet of Self-Leveling Concrete
This large-scale self-leveling concrete installation at the Linden Housing Authority involved a complete floor preparation and leveling process on every floor of the 12-story structure. The product selected for the job was Sika 125 Self Leveler, a premium cementitious self-leveling underlayment trusted by professional flooring contractors for its superior flow characteristics, rapid set time, and reliable performance in high-volume commercial pours.
The full scope of work included:
- Removal of existing flooring on all 12 floors
- Shot blasting the concrete substrate to create a proper bonding profile
- Priming and waterproofing the entire perimeter of each floor before pouring
- Pumping and pouring Sika 125 Self Leveler across all 45,600 square feet
Every step of the preparation process was critical. Without proper substrate profiling through shot blasting and thorough priming, self-leveling cement can fail to bond correctly — leading to delamination, cracking, and costly callbacks. The Concrete Makeover's crew ensured that every square foot was meticulously prepped before a single bag of material was mixed.
Pumped Up 12 Stories: The Logistics of a High-Rise Self-Leveling Pour
One of the most challenging aspects of this project was the sheer vertical scale. The self-leveling material had to be pumped up all 12 floors of the building — a feat that requires powerful mixing and pumping equipment, carefully calibrated material consistency, and experienced operators who understand the demands of high-rise concrete pumping.
Pumping self-leveling concrete to upper floors is not a simple task. The material must maintain the correct water-to-powder ratio throughout the pumping process to ensure it flows properly and achieves a flat, level finish once poured. Too much water weakens the final product; too little causes the material to set prematurely in the lines. The Concrete Makeover's team managed this balance expertly across every floor of the building.
Video: Exterior view of the 12-story Linden Housing Authority building during the self-leveling concrete project
6 Floors in 6 Hours: Speed and Efficiency at Scale
Perhaps the most impressive statistic from this project is the speed at which The Concrete Makeover's crew operated. The team completed 6 full floors in just 6 hours, pouring a total of 22 pallets of Sika 125 Self Leveler in that single work session. That level of output requires flawless coordination between the mixing station, pump operators, and the floor crew spreading and finishing the material.
With only 8 crew members on site, the efficiency of this operation speaks volumes about the experience and professionalism of The Concrete Makeover's team. Each crew member knew their role — from operating the pump and managing material flow to using gauge rakes and smoothing tools to ensure a perfectly flat, bubble-free surface on every pour.
Video: Self-leveling concrete being pumped and poured onto the floor inside the Linden Housing Authority building
Why Sika 125 Self Leveler?
Sika 125 Self Leveler is a high-performance, cement-based self-leveling underlayment designed for interior use over a wide range of substrates. It is the go-to product for professional contractors tackling large-scale commercial self-leveling projects because of its:
- Excellent flow and self-leveling properties — the material spreads evenly with minimal tooling
- Rapid set time — allowing foot traffic in as little as 2–4 hours
- High compressive strength — providing a durable, long-lasting subfloor
- Pumpability — ideal for large-area pours and multi-story applications
- Compatibility — works over concrete, tile, terrazzo, and other approved substrates
For a project of this magnitude — 45,600 square feet across 12 floors — choosing the right self-leveling product was essential. Sika 125 delivered the performance, workability, and reliability that The Concrete Makeover needed to complete the job on time and to the highest standard.
The Self-Leveling Process: From Prep to Pour
Self-leveling concrete installation is a multi-step process that demands precision at every stage. Here is how The Concrete Makeover approached each floor of the Linden Housing Authority project:
1. Existing Flooring Removal: All old flooring materials were stripped from the substrate, exposing the raw concrete underneath.
2. Shot Blasting: The concrete surface was mechanically profiled using shot blasting equipment. This process removes contaminants, opens the pores of the concrete, and creates the ideal surface profile (typically CSP 3–5) for self-leveling cement adhesion.
3. Priming: A bonding primer was applied to the prepared substrate. Priming is essential to control the porosity of the concrete and ensure a strong bond between the substrate and the self-leveling overlay.
4. Perimeter Waterproofing: Before pouring, the entire perimeter of each floor was waterproofed to prevent material from seeping into joints, cracks, or adjacent spaces.
5. Mixing and Pumping: The Sika 125 Self Leveler was mixed to manufacturer specifications and pumped through hoses up to each floor. The material was continuously monitored for proper consistency.
6. Pouring and Finishing: Once on the floor, the self-leveling cement was distributed using gauge rakes and smoothing tools to ensure an even, flat surface. The material's self-leveling properties did much of the work, flowing into low spots and creating a perfectly level plane.
Video: Crew members pouring and spreading self-leveling concrete inside a unit at the Linden Housing Authority
Why Choose The Concrete Makeover for Self-Leveling Concrete?
The Concrete Makeover LLC has built a reputation as one of New Jersey's premier concrete flooring contractors. With over 15 years of experience in self-leveling concrete, epoxy flooring, concrete polishing, and decorative concrete systems, the company has the expertise, equipment, and manpower to handle projects of any size — from single-room residential renovations to massive multi-story commercial installations like the Linden Housing Authority.
Key advantages of working with The Concrete Makeover include:
- Licensed NJ Contractor — HIC #13VH07353600
- 15+ years of hands-on experience in concrete flooring
- Industrial-grade pumping equipment for high-rise and large-area pours
- Expert crew trained in self-leveling, shot blasting, priming, and floor preparation
- Serving NJ, NY, PA, and CT — residential and commercial projects
Get a Free Quote for Your Self-Leveling Concrete Project
Whether you need self-leveling concrete for a commercial renovation, a multi-story building, a warehouse floor, or a residential remodel, The Concrete Makeover has the experience and capability to deliver exceptional results — on time and on budget. Our team specializes in floor preparation, self-leveling underlayment, concrete leveling, and commercial flooring throughout New Jersey, New York, and Connecticut.
Ready to get started? Contact The Concrete Makeover today for a free on-site assessment and quote. Call us at 732-259-5932 or fill out the contact form below. Let us show you why contractors, property managers, and building owners across the tri-state area trust The Concrete Makeover for their most demanding flooring projects.
Get a free quote · The Concrete Makeover, 2301 E Edgar Rd, Unit 5A, Linden, NJ 07036 · 732-259-5932