15+ Years in NJLicense #13VH07353600732-259-5932
SERVICE AREA

Warehouse Floor Coatings in Burlington County, NJ

Burlington County is South Jersey’s large warehouse belt on the New Jersey Turnpike and I-295, sitting between the North Jersey industrial market and Philadelphia. The Concrete Makeover installs warehouse epoxy, polished concrete, grind and seal, joint filling, and aisle marking in Florence, Burlington Township, Bordentown, Mount Laurel, Moorestown, and the rest of the county, from our shop in Linden.

If you run a distribution building on this spine — especially the newer boxes around Florence and the Turnpike interchanges — the floor has the same long-aisle and joint problems you see in Central Jersey, plus the reality of serving two metro areas. We quote after a free site walk. Warranties vary by system.

A Philly-and-New-York logistics county, not a North Jersey suburb

Cushman & Wakefield’s Q1 2026 Greater Philadelphia industrial report lists Burlington County at 55,452,219 square feet of industrial inventory, with a 5.5% vacancy rate. Southern New Jersey as a whole is listed at about 110.4 million square feet in that book. Those are brokerage figures, not The Concrete Makeover project totals, and they put this county in a similar size class to the Exit 8A submarket in Central Jersey.

Towns and parks, used as geography:

  • Florence Township and the Turnpike Exit 6 / 6A area, including industrial addresses along Richards Run (Haines Industrial Center / 900 Richards Run appears in public leasing coverage). Exit 6A also connects to the Pennsylvania Turnpike.
  • Burlington Township and Bordentown, along the Turnpike and Route 130.
  • Mount Laurel and Moorestown, more I-295 (including the Exit 47 area) and the eastern side of the county’s industrial inventory.

For a building actually in Cherry Hill or Camden, use those existing pages. This county URL is for the Burlington warehouse belt, not a rewrite of those cities.

Typical floor problems in this corridor

Large modern boxes. Newer Florence and Turnpike-adjacent buildings look a lot like Exit 8A product: long aisles, high racking, slab joints that will fail under forklifts if they are not filled, and tight turnover clocks when a 3PL or retailer takes the space.

Older industrial along Route 130 and I-295. Previous coatings, oil, uneven slabs, and moisture are more common. A coating alone will not flatten a rolling floor.

Cross-metro traffic. Buildings here often serve both the New York and Philadelphia sides of the market. That usually means higher dock utilization and more grit and water at the doors, not a different resin chemistry by itself.

Distance is a planning issue, not a reason to skip prep. We schedule the job around your shutdown window and our Linden shop. We complete full joint work and surface preparation on every floor, however far south of Trenton the building is.

Systems we recommend here

  • Zoned floors on the larger boxes: heavier industrial epoxy in aisles and docks, polished or grind-and-seal concrete in the open or racking footprint.
  • Joint filling and spall repair as a required step.
  • Aisle marking after the surface can take traffic.
  • Self-leveling when the slab has to be corrected.
  • Urethane cement in washdown or food-adjacent rooms, discussed honestly instead of hidden under a standard epoxy.

Details: warehouse floor coatings in New Jersey, polished concrete, epoxy flooring, grind and seal, self-leveling concrete, and industrial and retail floors.

Highways and how we get there

The county is organized by the New Jersey Turnpike (Exits 5, 6, and 6A are the industrial ones most often cited), I-295, Route 130, and the Pennsylvania Turnpike connector at 6A. Our shop is at 2301 E Edgar Rd, Unit 5A, Linden, NJ 07036. We also serve Pennsylvania, which matters for buildings that sit on this bi-state logistics spine.

Related pages: Cherry Hill, Camden, Exit 8A (the comparable Central Jersey big-box belt), and the full service-area list.

Frequently asked questions

Do you install warehouse floors in Burlington County?
Yes, including Florence, Burlington Township, Bordentown, Mount Laurel, and Moorestown.

Is Burlington County too far from your Linden shop?
No. It is a regular Turnpike / I-295 corridor for us, and we also serve Pennsylvania. Travel is planned around your receiving schedule.

What kinds of warehouse floors do you see in Florence and along I-295?
A mix of large modern distribution buildings and older industrial product. Newer boxes need aisle and joint work similar to Exit 8A; older buildings often need more repair.

You already have Cherry Hill and Camden pages. Why a county page?
Those pages stay the home for those cities. This URL is the Burlington County warehouse belt.

How much does a warehouse floor cost in Burlington County?
It depends on size, condition, and system. Free on-site quote.

Are you licensed?
Yes. NJ HIC 13VH07353600. Call 732-259-5932, Monday–Friday, 7 AM–5 PM.

Request a Burlington County site walk

Get a free on-site quote or call 732-259-5932. Tell us the town and the building use.

The Concrete Makeover LLC, 2301 E Edgar Rd, Unit 5A, Linden, NJ 07036. Licensed NJ HIC #13VH07353600. Hours: Monday–Friday, 7 AM–5 PM. Serving New Jersey, New York, Pennsylvania, and Connecticut.

Warehouse coatings · Commercial flooring · Commercial projects

Free Estimate

Get a Free On-Site Quote

Free, no-pressure on-site quotes for residential and commercial concrete floors. Call 732-259-5932, email info@theconcretemakeover.com, or fill out the form.

  • ✓Diamond Ground — Every Job, No Exceptions
  • ✓Licensed NJ Contractor — #13VH07353600
  • ✓2301 E Edgar Rd, Unit 5A, Linden, NJ 07036